It is a small amount and usually not noticed. However, over time, this can cause the violin bridge to lean towards the fingerboard as the Australia Mobile Number Database strings are tightened. The correct angle of the bridge can be determined by looking Australia Mobile Number Database from the side of the bridge facing the tailpiece. It should be perpendicular to an imaginary straight line or tangent beginning at the point where the bridge rests on the Australia Mobile Number Database curve of the violin. If the violin bridge leans too much off perpendicular, then the bridge may warp and possibly break.
The correct position for the bridge is to align the feet of the bridge between the two small nicks on the inside of the two f-holes. To correct the Australia Mobile Number Database violin bridge angle, you should lay the violin down on its Australia Mobile Number Database back on a cloth or in its case. Rest your hands just above the widest part of the violin and grip the bridge between thumb and Australia Mobile Number Database index finger or thumb and middle finger. There is a lot of Australia Mobile Number Database pressure required to move the bridge. This must be done gradually without moving the placement of the feet.
Look at fine tuners should not be touching the wood of the instrument. You should look to make sure that there is a space between each tuner Australia Mobile Number Database and the top of the instrument. Fine tuners have been known to have Australia Mobile Number Database caused damage by digging into the wood in this manner. Examine the pegs. They should move easily, but not slip too much. Either way, they may need attention. If a peg Australia Mobile Number Database sticks too much, you can loosen it with commercial peg drops such as Hill Peg Compound.